CryptoGrabber Spark-2 for KIA, Hyundai, Mitsubishi Fast Start Emulator

Description

Spark-2 CryptoGrabber for Kia, Hyundai and Mitsubishi

Spark-2 is a professional automotive electronic device designed for keyless system emulation, diagnostics and advanced operation with compatible Kia, Hyundai and Mitsubishi vehicles.

The device supports key emulation, PIN code calculation, vehicle data processing and key programming assistance for the supported vehicle configurations. Its functions include vehicle unlocking, locking and engine starting.

Automatic Keyless Operation

Important: For supported vehicle configurations, operating Spark-2 requires only pressing the keyless-access button on the vehicle’s door handle. Once activated, the device automatically performs the subsequent signal processing and key emulation procedure without requiring manual intervention at each stage.

This automatic operation is designed to simplify the process of working with compatible vehicle keyless systems.

Hardware and Device Features

Spark-2 is equipped with an integrated 3D antenna for vehicle data reception, 40 internal memory cells and an individual activation PIN. The device is powered by two AA batteries.

The system supports standalone data calculations and PC-assisted monitoring for compatible vehicle configurations. Its intelligent calculation algorithm is designed to process supported data efficiently, with a typical calculation time of approximately one minute.

Spark-2 Capabilities

All-keys-lost operation, including unlocking, locking and engine starting on supported vehicles.
Automatic keyless operation initiated by pressing the vehicle’s door-handle button.
Calculated PIN code display for key programming through the vehicle’s diagnostic connector.
Intelligent data-calculation algorithm with a typical processing time of approximately one minute.
Standalone PIN-based data calculation for supported newer vehicles without requiring a computer.
PC software for monitoring calculations on compatible newer vehicle systems.
Integrated 3D antenna for vehicle data capture.
40 internal memory cells for storing supported data.
Individual activation PIN for device access.
Power supply using two AA batteries.

Supported Vehicle Models

The following compatibility list identifies supported Kia, Hyundai and Mitsubishi vehicle models, production years and regional markets. Compatibility depends on the specific vehicle configuration, installed keyless system and applicable device software version.

Kia

Kia Stinger 1G — 2017-2021 — EUR/USA
Kia Sportage 4G FL — 2018-2022 — EUR/USA
Kia Sportage 4G — 2016-2018 — EUR/USA
Kia Sorento 3G FL Prime — 2017-2020 — EUR/USA
Kia Sorento 3G Prime — 2014-2017 — EUR/USA
Kia Niro Hybrid 1G FL — 2019-2022 — EUR/USA
Kia Niro Hybrid 1G — 2016-2019 — EUR/USA
Kia K900 2G — 2018-2022 — EUR/USA
Kia Telluride 1G — 2019-2025 — EUR/USA
Kia K3 2G FL — 2021-2025 — EUR/USA
Kia Forte 3G FL — 2021-2025 — EUR/USA
Kia Cerato 4G FL — 2021-2025 — EUR/USA
Kia K5 3G — 2019-2025 — EUR/USA
Kia Ceed 3G FL — 2021-2025 — EUR/USA
Kia Proceed 3G FL — 2021-2025 — EUR/USA
Kia XCeed 1G FL — 2022-2025 — EUR/USA
Kia EV6 — 2021-2025 — EUR/USA

Hyundai

Hyundai Tucson 3G FL — 2018-2021 — EUR/USA
Hyundai Tucson 3G — 2015-2018 — EUR/USA
Hyundai Santa Cruz — 2021+ — EUR/USA
Hyundai Santa Fe 4G FL — 2020-2025 — EUR/USA
Hyundai Santa Fe 4G — 2018-2021 — EUR/USA
Hyundai Palisade 1G — 2018-2022 — EUR/USA
Hyundai Sonata 8G — 2019-2025 — EUR/USA
Hyundai Tucson 4G — 2020-2025 — EUR/USA
Hyundai Kona Hybrid 1G — 2019-2023 — EUR/USA
Hyundai Kona Electric — 2019-2023 — EUR/USA
Hyundai Kona — 2019-2023 — EUR/USA
Hyundai Ioniq Hybrid 1G FL — 2019-2022 — EUR/USA
Hyundai Ioniq Hybrid 1G — 2016-2019 — EUR/USA

Mitsubishi

Mitsubishi ASX — 2016-2020 — EUR/USA
Mitsubishi Outlander 3G — 2015-2020 — EUR/USA