Spark-3 Crypto Grabber for Chinese Cars

Spark-3 Crypto Grabber for Chinese Cars
Spark-3 Crypto Grabber for Chinese Cars

Description

Spark-3 Crypto Grabber for Chinese Cars

This Spark-3 configuration covers the Chinese vehicles listed in the C1–C5 package matrix. Model codes and production years determine the required package; hardware and calculation functions are documented after the compatibility data.

Spark-3 Chinese Vehicle Package Matrix

Most popular Chinese brands, packages C1, C2, C3, C4 and C5, version 11.11.25.

KAIYI

  • E5 (GS11, 2021+) — C2

CHERY

  • Arrizo 6/7 (GX) (M1D, 2018–2019) — C3
  • Arrizo 8 (M1E, 2022+) — C2
  • Tiggo 4 (T19, 2019+) — C3
  • Tiggo 4 (T1C, 2018+) — C2
  • Tiggo 5 (T1C, 2018+) — C2
  • Tiggo 7 (T15, 2016+) — C3
  • Tiggo 7 Pro (M1D, 2020+) — C3
  • Tiggo 8 (T18, 2020+) — C2
  • Tiggo 8 Pro (T1A, 2021+) — C2
  • Tiggo 8 Pro Max (T1D, 2022+) — C2

EXEED

  • LX (T1A, 2019+) — C2
  • VX (M36T, 2021+) — C1
  • TX / TXL (M31T, 2019–2021) — C1
  • TX / TXL (M32TFL, 2021+) — C1
  • RX (M38T / T22 / T26, 2023+) — C2

OMODA

  • C5 (T19C, 2022+) — C2
  • S5 (M1DFL2, 2016+) — C3
  • S5 (M1DFL2, 2016+) — C2
  • S5 GT (M1DFL3, 2022+) — C2
  • C7 (T1GC, 2024+) — C2
  • C9 (T9, 2024+) — C2

The source matrix lists S5 (M1DFL2, 2016+) under both C3 and C2. Confirm the required package for the exact vehicle before ordering.

JAECOO

  • J7 (2023+) — C2
  • J8 (2024+) — C2

GEELY

  • Coolray (2019+) — C5

CHANGAN

  • UNI-T (2020+) — C4
  • UNI-K (2020+) — C4
  • UNI-V (2022+) — C4
  • CS35+ (2019+) — C4
  • CS55+ (2019+) — C4
  • UNI-S (2019+) — C4

Spark-3 Functions and Hardware

  • Open, close and start supported vehicles when all keys are lost
  • Display the calculated PIN for key programming through the diagnostic connector
  • Calculate data for newer vehicles directly on the device without a computer
  • PC software for faster calculations on supported newer vehicles
  • 3D antenna for vehicle-data reception
  • Unique activation PIN
  • LiPo battery power

Spark-3 Additional Functions

  • ISKRA-3 operation with supported PEPS or BDM units when all keys are lost
  • Calculated PIN display for OBD key programming on applicable vehicles
  • Control of the ZAVESA intelligent jammer
  • Key-emulation data acquisition through the diagnostic port or CAN bus when an OBD logger is installed

Equipment depends on the selected package configuration. The supported model range is listed in the accompanying vehicle document.

The Spark-3 for Chinese vehicles is part of the Spark family in the crypto grabbers section; the full emulator range is on the homepage.