Relay Attack AKS PRO V11.1 Keyless Go Repeater for sale
Description
Important: this device does not support UWB keys. Refer to the manual for the known list of vehicles equipped with UWB-enabled keys.
This device is not intended for unlawful use.
The product is available from our store or can be shipped by courier following full advance payment.
Product Overview
Smart Key WAVE is a radio transceiver system designed to relay received signals and extend the communication link. It is a relay device rather than a code grabber.
Also referred to as a Keyless Relay Stick, Universal Stick, Long Arm, Wave or Multibrand device, the system is described for compatible vehicles equipped with factory-installed Keyless Go or Keyless Entry systems. Its listed functions include vehicle unlocking and engine starting.
The stated communication distance between the two modules is up to 300 metres. This figure should be distinguished from the operating distance between the device and the original key, which remains a separate limitation.
Operating Modes
1. TOY-LEX Mode
The supplied compatibility description lists vehicles equipped with supported factory keyless systems from:
- Toyota: 2009–2025.
- Lexus: 2006–2025.
- Subaru: 2008–2025.
UWB-equipped vehicles are excluded. Consult the compatibility list for the applicable models and configurations.
2. Multibrand Mode
This mode is described for supported vehicles from other manufacturers equipped with Keyless Go or Keyless Entry systems, covering the stated 2017–2026 model-year range.
3. FBS4 Mode
The supplied description identifies an operating mode labelled FBS4, with listed Mercedes-Benz coverage through 2025.
Audi coverage through 2026 is also stated in the original description. Its inclusion under the FBS4 mode label requires clarification in the product documentation.
Key Detection in TOY-LEX Mode
For supported Toyota, Lexus and Subaru systems, TOY-LEX mode includes key detection and recognition. This allows the operator of the larger module to see whether a compatible key is within the device’s operating range.
Communication Range
The stated communication range between the modules is up to 300 metres, including operation in built-up areas and indoors.
The original description explains that the radio-link margin helps maintain communication through obstacles. Actual performance depends on the surroundings, building materials, interference and the condition of the key’s battery.
The description separately states an effective operating range of approximately 100–200 metres, rarely exceeding 250 metres. These figures are not the same as the distance at which the larger module can communicate with the key.
Operation Around Obstacles
The radio-link margin is intended to support communication where walls, buildings or other obstacles attenuate the signal.
The supplied example describes communication through several reinforced-concrete walls. Performance in these conditions depends on the installation and surroundings; the stated maximum range should not be treated as a guaranteed distance in every location.
Placement of the Smaller Module
The smaller module is described as functioning similarly to the original key. Its position inside the vehicle may vary by model, so placement requirements should be checked in the operating instructions.
Development and Updates
The supplied description states that the device undergoes ongoing improvements, updates and vehicle testing. Refer to the current documentation for the capabilities of the particular hardware and software version.
Listed Vehicle Brands
The original description lists the following brands as tested:
- BMW
- Mercedes-Benz
- Audi
- Mazda
- Honda
- Toyota
- Lexus
- Subaru
- Nissan
- Infiniti
- Hyundai
- Kia
- Porsche
- Citroën
- Peugeot
- Renault
- Mitsubishi
- Volkswagen
- Dodge
- Tesla Model S only
Other Chinese, Japanese, Korean, German and American vehicles are also mentioned. A brand appearing in this list does not establish compatibility with every model, production year or keyless-system configuration. UWB-equipped keys remain excluded. Consult the current model-specific compatibility information.
Operating Principle
The system consists of two relay modules: a receiving module and a transmitting module.
The receiving module is positioned near the vehicle, while the transmitting module is positioned near the original key. When activated, the modules establish a communication link that relays requests between the vehicle and the key.
Operating Requirements
The supplied instructions specify:
- The receiving module, or smaller unit, should be positioned 10–30 cm from the door handle, near the vehicle’s antenna.
- The transmitting module, or larger unit, should be positioned within 5–7 metres of the key, with its antenna plane aligned horizontally towards the key.
- Incorrect antenna orientation may reduce the effective operating distance.
- Optional extended antennas are described as increasing the operating distance to the key to up to 15 metres.
These distances concern module placement and communication with the key. They should not be confused with the stated communication range between the two modules.
Package Contents
- One larger module.
- One smaller module.
- Charger.
Warranty and Support
Devices manufactured by our company include a one-year warranty, servicing, software updates and customer support.
